AT-LP8X
Audio-Technica expands its line of direct-drive turntables with the semi-automatic AT-LP8X, featuring a newly designed tonearm lift that automatically raises the tonearm at the end of a record side and stops the motor.

Semi-Automatic Operation
Convenient Listening
The AT-LP8X’s tonearm lifts automatically at the end of a record and its motor automatically stops – rare features on a direct-drive turntable. This gives you the freedom to listen casually and not worry about when a record will end.
Features
- Semi-automatic direct-drive turntable with three speeds: 33-1/3, 45, 78 RPM
- Motor features a speed-sensor system to maintain accurate platter rotation speed
- Newly designed low-torque, direct-drive DC servo motor improves wow and flutter performance
- 25 mm rubber-damped, anti-resonance, die-cast aluminum platter with 2.5 mm rubber mat
- J-shaped tonearm with adjustable VTA (vertical tracking angle)
- Newly designed tonearm lift automatically raises the tonearm at the end of a record side and stops the motor
- AT-VM95E BK (black) cartridge (0.3 x 0.7 mil elliptical stylus) is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
- Newly designed lightweight AT-LT10 headshell
- Included subcounterweight provides an expanded cartridge/headshell weight range of 14.0 g – 23.5 g
- Newly designed internal switching power supply, optimized for audio performance
- MDF (medium density fiberboard) cabinet construction
- Phono-level output provides pure, direct transmission of the cartridge’s signal
- Includes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover
Specifications
Motor DC servo
Drive Method Direct drive
Speeds 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter Die-cast aluminum, rubber damper
Starting Torque 1.0 Kgf.cm
Braking System Electronic brake
Wow and Flutter < 0.1% (WTD) at 3 kHz (JIS)
Signal-to-Noise Ratio > 60 dB
Cartridge Type VM (AT-VM95EBK)
Output Level PHONO: 4.0 mV nominal at 1 kHz, 5cm/sec
Power Supply Requirements 100 to 240 V, 50/60 Hz
Power Consumption 8 W
Dimensions 450 mm (18″) × 352 mm (14″) × 161 mm (6.3″) (W×D×H)
Weight Approx. 10.4 kg (23 lbs)
Accessories Included ・Dust cover
・Rubber mat
・Platter
・Dust cover hinges
・Counterweight
・Subcounterweight
・Headshell (AT-LT10) with VM stereo cartridge (AT-VM95E BK)
・45 RPM adapter
・RCA audio cable (Approx. 1.0 m (3.3′))
・Power cable (Approx. 1.8 m (5.9′))
Tonearm Type Static balanced J-shaped tonearm
Effective Arm Length 247 mm (9.7″)
Overhang 15 mm (0.59″)
Tracking Error Angle Less than 2.0°
Stylus Pressure Adjustment Range 0.0 to 4.0 g
Applicable Cartridge Weight 14.0 to 20.0 g (including headshell)
(When using subcounterweight: 17.5 to 23.5 g)
Replacement Stylus AT-VMN95EBK
Replacement Headshell AT-LT10
Notes For product improvement, the product is subject to modification without notice.
รีวิว
ยังไม่มีบทวิจารณ์