เครื่องเล่นแผ่นเสียง Pro-Ject The Classic SB SuperPack Walnut (Original Box)

THE CLASSIC SB SUPERPACK

Subchassis turntable with 9“ carbon/alu sandwich tonearm

• Ortofon Qintet Red cartridge pre-installed
• Electronic speedcontrol (33/45 rpm)
• Top grade Clamp it included
• Leather mat included
• Belt drive with electronic speed control 33/45 rpm
• Height adjustable decoupling feet
• Precision balanced TPE*-damped aluminium-platter /
felt mat
• Metal/MDF sandwich chassis floating on TPE* suspension
• 9” carbon/aluminium tonearm with MM & MC capability
• Japanese ball bearing (base of tonearm)
• Integrated central vertical cable outlet for unhindered
arm movement
• Ultra low friction zircon pin-point cardan bearings (top
& side)
• Azimuth and VTA fully adjustable
• TPE damped counterweight
• Classic wooden chassis in 3 matt finishes (walnut, rose-
nut, eucalyptus)

Speed: 33, 45 (manual speed change)
Drive principle: belt drive
Platter: 300mm aluminium
Mains bearing: stainless steel
Wow & flutter: 33: ±0,10 % 45: ±0,09 %
Speed variance: 33: ±0,13% 45: ±0,10 %
Signal to noise: 70dB
Tonearm: 9” carbon/aluminium sandwich tonearm
Effective arm length: 230 mm
Effective arm mass: 13,5 g
Overhang: 18 mm
Tracking force: 10 – 30mN
Included accessories: 15 volts DC / 0,8A power supply,
dust cover
Power connection: 110/120 or 230/240 Volt – 50 or 60 Hz
Power consumption: 5 watt max / < 0,5 watt standby
Dimensions: 462 x 131 x 351 mm (WxHxD) lid closed,
462 x 423 x 390mm
Weight: 10,5 kg

The Classic SB Superpack offers classic
look and innovative high-end technology
This turntable makes use of traditional frame design
which was established by the famous turntable manufacturers of the 50’s and 60’s. It uses a compact simple and
elegant form factor. The Classic SB Superpack incorporates a combination of approved belt drive design using
a low noise AC motor with an ultra precision frequency
DC-driven AC generator for ultimate speed stability.
The Classic SB Superpack convinces with high precision dynamics and its rich details. For improved comfort
an electronic speed change was built in, which lets you
switch from 33 to 45 rpm (and vice versa) with the push
of a button. Advanced technology is used for decoupling
and the completely new designed tonearm.
Chassis & Subchassis
Like our famous Debut we wanted to create an easy to
use “plug & play” product, but with better sound due to
better isolation.
Thanks to the modern damping materials TPE* we are
able to design a very effective, subchassis construction.
Isolating the platter and tonearm from the resonances of
the motor and main plinth is the target.

Platter & sub-platter
The heavy aluminium main platter construction utilises
advanced thermo plastic elastomers (TPE*) for optimising resonance behaviour.
A drawback for most of the old designs was the platter. Casted platters all have been heavy (which is good
for speed constancy and low wow and flutter) but suffered very much from ringing effects which again caused
colouration of the sound. The platter of The Classic SB
Superpack is precisely machined out of a special aluminium alloy again damped with TPE*, which offers special
damping abilities. The subplat-ter / main bearing construction we use is similar system as on the Debut. It is
made of hardened steel/ Bronze bushing/ Teflon bearing
mirror, which results in very smooth low noise running
smoothness of the bearing.

The main difference to the Debut bearing are the tolerances which are by factor 10 lower and therefore more
precise (0,005%). Especially the subplatter is a very sophisticated part which is accurately machined and guarantees a very good isolation between bearing noise and
the platter itself

New carbon/aluminium tonearm
The radical new designed Classic tonearm is the result of
25 years of experience in mechanical construction. The
tonearm tube is made out of a sandwich of carbon and
aluminium: carbon for stiffness and speed, alu for better
damping. The cardan bearing assembly with pin-point zircon bearing provides ultra low friction. A new expensive
Japanese base-ball-bearing allows a better lead of the tonearm wire and increases the free movement of the arm.
The counterweight incorporates a TPE* damper which
allows us to reduce the amplitude of the tonearm cartridge resonance frequency by 50%.
As typical for Pro-Ject and absolutely not standard at
that price range we offer also azimuth and VTA adjustment to use a variety of cartridges. Different counterweight for cartridges up to 25 grams are available as an
option.